|Cycle Life(25°C)||>3500 cycles|
|Working Voltage||≤ 0.5mΩ|
|End of discharge Voltage||2.5V|
|Standard charge and discharge Charge/Discharge Current||3C/3C|
|Pulse Charge/Discharge Current（30s）||5C/5C|
|Recommended SOC window||10%-90%|
|Charging Working Temperature||0℃-60℃|
|Discharging Working Temperature||-30℃-60℃|
|Dimensions(mm)||173.7mm x 72.0mm x 207.5mm|
Would you like to set up a battery for your camper or as a solar battery/storage?
With us you get the right LiFePo4 cells for it. A small example of possible capacities with our bestselling 280Ah LF280K cell can be found below:
4 cells connected in series give you a cell voltage of 3.2V = 12.8V system voltage which corresponds to a capacity of 3.58 kWh .
2 x 4 cells connected in series and parallel double the capacity with the same system voltage to 7.16 kWh
8 cells connected in series give you a cell voltage of 3.2V = 25.6V system voltage, which corresponds to a capacity of 7.17 kWh .
2 x 8 cells connected in series and parallel double the capacity with the same system voltage to 14.34 kWh
12 cells connected in series give you a cell voltage of 3.2V = 38.4V system voltage which corresponds to a capacity of 10.75 kWh .
2 x 12 cells connected in series and parallel double the capacity with the same system voltage to 21.5 kWh
16 cells connected in series give you a cell voltage of 3.2V = 51.2V system voltage, which corresponds to a capacity of 14.34 kWh .
2 x 16 cells connected in series and parallel double the capacity with the same system voltage to 28.68 kWh
LF280K 3.2V 280Ah lithium iron phosphate LiFePO4 battery is a new model with an aluminum case, this battery cell has a super long cycle life of more than 12000times, have a stable performance used for ESS(energy storage system). All the cells we provide are brand new grade A with test reports and certifications.
The LFP280K is a type of Lithium Iron Phosphate (LiFePO4) battery cell. LiFePO4 is a type of Lithium-ion battery that has gained popularity in recent years for its high energy density and long cycle life compared to traditional lead-acid batteries. Here’s a detailed guide to the LFP280K LiFePO4 battery cells.
Construction and specifications:
The LFP280K is a cylindrical cell that measures 28mm in diameter and 70mm in length. It has a nominal voltage of 3.2V and a capacity of 3Ah. The cell’s weight is approximately 72g.
LiFePO4 cells are known for their high thermal stability and low risk of thermal runaway. They have a higher voltage and lower internal resistance compared to other types of lithium-ion batteries, which makes them a popular choice for high-power applications. The LFP280K has a relatively low capacity compared to other LiFePO4 cells, but it makes up for it with its high discharge rate, which is rated up to 15C.
LiFePO4 cells should be charged using a dedicated LiFePO4 battery charger. The charging voltage for the LFP280K is 3.65V, and the maximum charging current is 1C (3A). It is recommended to charge the cell at a slow rate (0.5C or 1.5A) to extend its life cycle. The charging process should be monitored to prevent overcharging, which can cause permanent damage to the cell.
The LFP280K has a maximum continuous discharge rate of 15C (45A), which means that it can deliver its full capacity in just a few minutes. The cell’s discharge voltage should not fall below 2.5V. If it does, the cell may become irreversibly damaged and its capacity may be reduced.
LiFePO4 cells should be stored in a cool, dry place with a charge level between 40-60%. It is important to avoid over-discharging the cells during storage, as this can cause capacity loss and reduce the overall life cycle of the cells.
LiFePO4 cells are considered one of the safest types of lithium-ion batteries due to their high thermal stability and low risk of thermal runaway. However, it is important to handle the cells with care to avoid damage and to ensure their safe usage. Overcharging, over-discharging, and puncturing the cells can cause a fire or explosion.
The LFP280K LiFePO4 battery cells are a popular choice for high-power applications due to their high discharge rate and relatively low internal resistance. Proper handling and maintenance of the cells is crucial to ensure their safe usage and to extend their life cycle.
1. One Cell will come with one set busbar, bolt, and washer for free. (e.g. 4 Cells will come with 4 pcs(busbars + bolts + washers) .
2. Each cell shall be used under the strict monitor, control, and protection by the BMS.
3. Before the first use, always charge the cells to full voltage. | FAQ: The Guide to Charging LifePO4 Batteries.
4. We will match (capacity, voltage, resistance) all cells before delivery.
5. The battery is suitable for DIY lovers with experience.
Promotions, new products and sales Directly to your inbox